Our exterior window stickers are easy to print and easy to apply. Here are the simple steps:
Exterior Window Sticker Printing Instructions
Load Exterior Window Sticker paper into tray 1 of the printer. The paper should is loaded with the DIE CUT SIDE UP (check your printer guide for more details or run a test with blank paper), so that it will print in the proper orientation. You will not need to change any settings on the printer. THE ONLY REQUIREMENT TO PRINT IS THAT YOU MUST USE A LASER PRINTER!
Wipe the window you wish to apply the sticker with a clean Terry Cloth Towel. Make sure that the window is free from moisture and dirt.
Remove the outside edge on the back of the newly printed window sticker and prepare to apply to the vehicle.
Line the window sticker up with the bottom of the window to ensure the sticker will be straight. Make sure to completely secure the edges of the sticker to the window. If the sticker is away from the window it will allow moisture to get behind the sticker and not stay adhered to the window properly. Do the same with the buyer’s guide. Completed stickers should look like picture below on the right.